Installing blinds in your Southampton home is a simple and effective way to control light, maintain privacy, and enhance the aesthetic appeal of your rooms. However, the process can be overwhelming if you are unsure about how to measure and install them correctly. Here’s a quick guide on how to do it with ease.
Firstly, it’s crucial that you get accurate measurements before purchasing blinds. For this task, you will need a metal tape measure for precision. When measuring for inside mount blinds (blinds that fit within the window frame), measure the width at three different points – top, middle and bottom. Use the narrowest measurement as your final width to ensure that your blinds won’t rub against the sides of your window frame.
For outside mount blinds (blinds that hang outside the window frame), start by determining where you want the blind to cover on each side of your window. A common rule of thumb is adding 2 inches on both sides for optimal coverage. Measure from these two points for your final width.
Next comes height measurement; again take three measurements- left, center and right for inside mounts while only one from top edge down to where you want it to fall for outside mounts.
Once you have accurate measurements in hand, choosing and ordering blinds becomes easier. There are numerous styles available in awnings southampton such as roller shades, Venetian or vertical slats among others offering plenty of choices based on personal preference or room requirements.
After purchasing suitable blinds according to measurements taken earlier, it’s time now for installation which is quite straightforward if instructions provided by manufacturer are followed diligently.
For inside mounts: Place brackets at each corner within casing ensuring they’re level so blind hangs straight when installed later. Screw brackets into place using screws provided then simply slide headrail into brackets until it snaps securely into place.
For outside mounts: Brackets should be attached directly onto wall or moulding above window with enough clearance so blind operates smoothly. Once brackets are secured, headrail can be inserted and snapped into place.
Finally, attach wand or cord to operate blinds and make sure they open, close and tilt properly. If everything works as expected, you’ve successfully installed your new blinds!
Remember that patience is key during this process. Take your time with measurements to avoid costly mistakes and follow the manufacturer’s instructions carefully during installation. With a little bit of effort, you can transform the look of your Southampton home by measuring and installing blinds with ease.
Final Touch Blinds & Shutters
Alpha House, Duncan Rd, Park Gate, Southampton SO31 1ZS
44-1489-290059
